Resin coatings - TENNIS COURTS

Creating an outdor/indoor tennis court coating on concrete

Tennis court coatings designed for application on a concrete subbase must be made using a flexo-plastic product, of approx.2 mm of thickness, capable of allowing the athlete to absorb the impact whenever a foot hits the ground while creating a resilient surface with good traction and ball response.

NORD RESINE recommends using NORDSET.


Realizing the coating - Outdoors

First of all, concrete must be prepared to prevent moisture to escape from the bottom and to be drawn up trough the pavement consequently causing the formation of bubbles on the coating. For this reason the cycle foresees a coat of NORPHEN SW SOLID diluted three times with water and then a skim coat of NORPHEN W3 IMPERMEABILIZZANTE charged with quartz 0.7 to 1.2 and broadcast to excess with quartz 0.3-0.9.

After hardening, once the excess quartz is removed, proceed with sanding and suck.


Applying the Product

  1. The coating layer should be applied with a steel spatula, after adding quartz 0.1-0.6 to NORDSET.
  2. To complete the coating application, a coat of NORDSET shall be applied using a roller.
  3. Road markings can be made with NORDSET yellow, red or green upon request, or with TIPEWALL available in all colors of both RAL and NCS scale.

Realizing the coating - Indoors

  1. The ideal primer for treating concrete even in the presence of moisture content provided is not higher than 5.5% (carbide measuring) is SOLID.
  2. For indoor application, the recommended product is NORDSET (as well as for outdoors) or better HELASTON COLOR, whose application shall be carried out using a notched spatula steel, in a single self-levelling coat.
  3. The strips of delimitation can be realized with TIPEWAL.


Related products

Polyurethane Finish

TIPEWALL is a two component product made up of: component A: a mixture of functionalized prepolymers, pigments, additives and solvents; component B: prepolysocyanate.   The two mixed components give rise …

Protective, waterproofing coloured coating,
for sports grounds

NORDSET is a water based system made up of modified styrene-acrylic polymers, additives and fillers in an aquous dispersion. After setting, the material provides very good walkability, considerably increased by …

Three Component Epoxy Coating

W3 IMPERMEABILIZZANTE  is a tricomponent product made up of: component A: an aqueous dispersion of liquid epoxy prepolymers, additives and special inert material; component B: an aqueous dispersion …

Primer for damp surfaces

SOLID is a primer for damp surfaces provided within a KIT composed by: SOLID component A: a mixture of water-based epoxy prepolymers, fillers and additives; SOLID component B: copolymer modified amine; SOLID …

Print as pdf