Resin coatings - GYMS and FITNESS CENTRE

Realizing sport coatings on a concrete substrate

Sport coatings designed for application on a concrete subbase must consist of a very elastic resin layer of a minimum thickness of 2 mm, capable of allowing the athlete to absorb the impact whenever a foot hits the ground.

For sport coatings NORD RESINE recommends using HELASTON COLOR.

 

Realizing the coating

First of all, the concrete must be prepared to prevent moisture to escape from the bottom and to be drawn up trough the pavement consequently causing the formation of bubbles on the coating.

For this reason, the first base coat shall be laid down applying the product SOLID.

HELASTON COLOR shall be applied in a single self levelling coat with a steel notched spatula.

The strips of delimitation can be realized with TIPEWAL available in all colours of either RAL or NCS scale.

Related products

HELASTON COLOR » 
Two-component elastomeric membrane

HELASTON COLOR is a two component product consisting of: Component A: a mixture of emulsified functionalized prepolymers, additives and fillers; Component B: prepolyisocyanates and solvent.   The two …

TIPEWALL » 
Polyurethane Finish

TIPEWALL is a two component product made up of: component A: a mixture of functionalized prepolymers, pigments, additives and solvents; component B: prepolysocyanate.   The two mixed components give rise …

SOLID » 
Primer for damp surfaces

SOLID is a primer for damp surfaces provided within a KIT composed by: SOLID component A: a mixture of water-based epoxy prepolymers, fillers and additives; SOLID component B: copolymer modified amine; SOLID …

 
Print as pdf