PRIMER SOLPLAST PU

Ready to Use Consolidating and Anchoring Base Coat

Description

PRIMER SOLPLAST PU is an anchoring and consolidating base coat based on solvents and hygro-hardening polymers with isocyanate groups.

Usage field

PRIMER SOLPLAST PU is a specifically designed impregnant capable of penetrating any dry building surface, binding and deeply consolidating the particles as well as improving the adhesion of any subsequent treatment. In particular, PRIMER SOLPLAST PU is used as an impregnating and anchoring base coat for the subsequent application of AMIANTOPLAST.

Packaging

1 and 20 litres

PRIMER SOLPLAST PU

Ready to Use Consolidating and Anchoring Base Coat

Application

The priming treatment must be preceded by a thorough cleaning of the surface:

  • on the screed by sanding with a monobrush;
  • on tiles by washing with NORDECAL FORTE and rinsing;
  • on metals by degreasing;
  • if it is to be applied on an asbestos-cement screed, directly impregnate it with the product, but only after making sure you removed all dirt, plants and other visible substances from the surface.

Apply PRIMER SOLPLAST PU with a roller or a brush.

Allow approx. 30-40 minutes after the application of the primer prior to overcoating with AMIANTOPLAST.

PRIMER SOLPLAST PU

Ready to Use Consolidating and Anchoring Base Coat

Average Consumption

Consumption: 0.10÷0.12 litres/m2

Yield: 8-10 m2/litre

PRIMER SOLPLAST PU

Ready to Use Consolidating and Anchoring Base Coat

Features

Bulk Density, UNI 8310

g/cm3

1.01 ± 0.03

Superficial Exsiccation Time, UNI 8904

min

30 ± 10

Application Temperature

°C

from + 5 to +35

Note: testing methods are in accordance with the standards referred to on the table.

PRIMER SOLPLAST PU

Ready to Use Consolidating and Anchoring Base Coat

Warning and informations
  • Avoid the formation of a superficial film due to the poor product absorption of the substrate.
  • The product is easily flammable.
  • Read the Material Safety Data Sheet (MSDS) before use