NORDOIL

Emulsifiable Form-Release Agent for Formworks

Description

NORDOIL is a mineral-based product that once applied to a formwork, prevents adhesion between the concrete and the formwork itself.

Usage field

As a release agent it is ideally suited for use on construction sites.

NORDOIL can be used on any type of surface made of wood, metal or synthetic material

Packaging

NORDOIL is available in 3 - 10 - 18 and 200 liters containers. 

NORDOIL

Emulsifiable Form-Release Agent for Formworks

Application

Product Preparation

It is advisable to initially prepare the emulsion by pouring a little water (approx. 5÷10%) into NORDOIL to initiate the emulsion, then it will be possible to dilute from 1 fold to 10 fold in water.

Any separation may occur in the emulsion is to be considered normal after a few hours of mixing and can be eliminated by remixing.

The product concentration should be chosen by taking into account the different features of the formwork to be used.

Product Application

Apply with a brush or scrubbing brush, or better, by srpaying with special nozzles.

The release can also occur after some time without affecting the result.

NORDOIL

Emulsifiable Form-Release Agent for Formworks

Average Consumption

Coverage is very variable and can range from 30÷40 up to 60÷70 square meters of the treated surface per 1 liter of diluted product.

NORDOIL

Emulsifiable Form-Release Agent for Formworks

Features

Bulk Density, UNI 8310

g/cm3

1.01 ± 0.05

Apparent Dynamic Viscosity, ISO 3219

mPa·s

850 ± 50

pH, UNI 8311

---

8 ± 1

Note: testing methods are in accordance with the standards referred to on the table. 

 

NORDOIL

Emulsifiable Form-Release Agent for Formworks

Warning and informations
  • The product is not dangerous, nonetheless a Material Safety Data Sheet is available
Preservation

Store in a covered place, at temperature between +4 and +30°C.