BRICK-O-LUX

Glossy Protective Treatment
for Sandblasted Bricks

Description

BRICK-O-LUX is a formulation based on non-yellowing thermoplastic resins dissolved in solvent.

The product, once applied to sandblasted bricks, gives rise to a glossy protective film capable of protecting the substrate from the aggression of external agents, that can have a more or less polished and shiny appearance depending on the amount of applied material.

Usage field

BRICK-O-LUX is a protective and aestheticizing treatment with a glossy or satin effect for sandblasted bricks.

 

Packaging

1 - 5 and 20 liters metal cans

BRICK-O-LUX

Glossy Protective Treatment
for Sandblasted Bricks

Application

Substrate Preparation

  • Before applying BRICK-O-LUX, the surface must undergo an acid washing with duly diluted NORDECAL FORTE GEL (see data sheet) and scrubbing brush, leaving it to work for a few minutes.
  • Rinse thoroughly with plenty of water.
  • Wait 7-8 days to allow the substrate to dry.

 

Application

BRICK-OR-LUX shall be applied with a flat brush.

If it is to be achieved:

  • a satin-effect on the surface, BRICK-O-LUX shall be applied in 3 coats 1 hour apart from each other;
  • a glossy effect on the surface, BRICK-O-LUX shall be applied in 5-6 in coats 1 hour apart from each other.

BRICK-O-LUX

Glossy Protective Treatment
for Sandblasted Bricks

Average Consumption

100-120 g/m2 per coat depending on the porosity of the substrate.

 

BRICK-O-LUX

Glossy Protective Treatment
for Sandblasted Bricks

Features

Appearance

-

colourless liquid

Odour/Smell

-

odourless

Bulk Density (20 ± 3°C, 50 ± 10% RH), UNI 8310

g/cm³

0.822 ± 0.005

Application temperature

°C

between +5 and +30

Maximum relative humidity for the application

%

85

Superficial drying time (tack free, 23 ± 2°C, 50 ± 10% RH),

UNI EN ISO 1517

min

30 ± 5

Note: testing methods are in accordance with the standards referred to on the table.

BRICK-O-LUX

Glossy Protective Treatment
for Sandblasted Bricks

Warning and informations
  • The product is ready for use.
  • BRICK-O-LUX must be applied at temperatures above +5°C.
  • During the first hours, the treated surface must be protected from rain.
  • The tools used for the application of the product can be washed with white spirit.
  • It is a flammable and dangerous to health product; refer to the Material Safety Data Sheet (MSDS) before use.
  • Keep the product away from heat and direct sunlight, store it in a dry place.
Preservation

24 months in original packaging, in a covered and dry place.

At temperatures between +5°C to +30°C.