NORDCOTTO DRY

NORDCOTTO DRY is an aqueous dispersion based on low molecular weight oligomers and polymers with functional modification properties.

Description

NORDCOTTO DRY is used for a total waterproofing, stain resistant action on cotto floors without altering their final appearance (totally invisible effect).
The result is particularly appreciated as cotto floors will retain their full natural colour and at the same time be easy to keep and enjoy.
NORDCOTTO DRY can also be used to enhance any oilwater repellent effect obtained with other treatments based on resin or wax products, or to achieve a dirtproof effect on other kinds of floors, including slightly porous resin floors.

Advantages

NORDCOTTO DRY delivers the best stainproof effect for cotto floors and in any case for absorbant floors now available on the market. The product can be used with no special precautions on any type of surface, even when not perfectly dry, and is totally non toxic.

Packaging

Available in 1, 5 and 30 litres packs.

NORDCOTTO DRY

NORDCOTTO DRY is an aqueous dispersion based on low molecular weight oligomers and polymers with functional modification properties.

Application

On a floor laid at least 25 day earlier, well cleaned but not necessarily perfectly dry, apply a first layer of NORDCOTTO DRY with roller, flat brush or sprayer (any tool used must be absolutely dry).
After a drying period varying from 30 minutes to 24 hours, depending on ambient temperature, apply a second layer, taking care to avoid any build up on the surface.
Any excess product (like drippings from the sprayer nozzle) must be removed immediately or taken up into a
cloth. When necessary, especially with particularly absorbant cotto floors, you can apply a third layer of NORDCOTTO
DRY 24 hours later.
If you wish to use NORDCOTTO DRY as a stainproof finish of other treatments in the NORDCOTTO range, apply a layer over the previous, well set treatment using the roller in a criss-cross fashion.

Timing: more than 2 days later.

NORDCOTTO DRY

NORDCOTTO DRY is an aqueous dispersion based on low molecular weight oligomers and polymers with functional modification properties.

Average Consumption

Average yield: 0.05÷0.10 litres/m2.

NORDCOTTO DRY

NORDCOTTO DRY is an aqueous dispersion based on low molecular weight oligomers and polymers with functional modification properties.

Features

Mass per volume, UNI 8310

g/cm³

1.01 ± 0.05

pH, UNI 8311 7

 

± 1

Contact angle

degrees

> 120


Water repellent by immersion  

%

> 80

Application temperature

°C

5 to + 30

Note: test data refer to quoted regulations.

NORDCOTTO DRY

NORDCOTTO DRY is an aqueous dispersion based on low molecular weight oligomers and polymers with functional modification properties.

Warning and informations
  • Check out beforehand on one tile whether there is incompatibility of materials.
  • When treating tiles made of a non perfectly homogeneous material, stains may initially start appearing due differential absorption of the superficial layer; they will disappear a few hours later.
  • Work must be stopped if there is the possibility of rain, snow, in case of fog and when temperatures drop below +5°C.
  • Use water to clean the tools.
  • The product is not hazardous; an information safety card is however available.
Preservation

Store in a sheltered place at temperatures between +4 and +30°C.