PETRA-LUX

Glossy Protective Treatment
for Natural Stone

Description

PETRA-LUX is a product based on non-yellowing thermoplastic resins dissolved in a solvent that gives rise to a shiny aestheticizing, glossy protective film capable of consolidating the substrate protecting it from the aggression of external agents and preventing the absorption of liquids which could indelibly stain it such as oil, coffee, wine and fat in general.

Usage field

PETRA-LUX is a protective treatment for natural stone and "Sassi di Assisi" natural pebble stone mosaics.

Packaging

1 - 5 and 20 liters metal cans 

PETRA-LUX

Glossy Protective Treatment
for Natural Stone

Application

Substrate Preparation

Wash the surface with CEM-CLEANER diluted with water in the ratio 1:5 by volume by means of a monobrush or a scrubbing brush.

Rinse thoroughly with water and completely remove all resulting liquid avoiding formation of stagnation zones on the area to be treated.

 

Application

After 7-8 days from washing, once the floor is completely dry and clean, it is possible to proceed with the application of PETRA-LUX in 2 or 3 coats spaced 2-3 hours apart from each other using a flat brush.

It is advisable to pour the product into a small bowl where the roller or the brush are to be dipped into, then apply PETRA-LUX taking care of evenly impregnating the substrate and avoiding the formation of product's puddles. 

PETRA-LUX

Glossy Protective Treatment
for Natural Stone

Average Consumption

150-200 g/m2 per coat depending on the porosity of the substrate to be treated.

 

PETRA-LUX

Glossy Protective Treatment
for Natural Stone

Features

Appearance

-

colorless liquid

Odour/Smell

-

of organic solvents

Bulk Density (20±3°C, 50±10% RH), UNI 8310

g/cm³

0.920 ± 0.005

Application temperature

°C

between +5 and +30

Maximum relative humidity for the application

%

85

Superficial drying time (tack free, 23±2°C, 50±10% RH), UNI EN ISO 1517

min

30 ± 5

Note: testing methods are in accordance with the standards referred to on the table.

PETRA-LUX

Glossy Protective Treatment
for Natural Stone

Warning and informations

Special Warnings and Instructions

-         The product is ready for use.

-         PETRA-LUX should be applied at temperatures above +5°C.

-         During the first hours, the treated surface must be protected from rain.

-         The tools used to lay the product can be washed with nitro diluent.

-         It is a flammable and dangerous to health product; refer to the Material Safety Data Sheet (MSDS) before use.

-         When applied inside close and poorly ventilated rooms, it is advisable to use an interchangeable filters mask with an universal A1B1E1K1P3 filter type.

-         Keep the product away from heat and direct sunlight, store it in a dry place.

Preservation

24 months in original packaging, in a covered and dry place.

At temperatures between +5°C to +30°C.