Special products for construction industry
Waterproofing - Damp Proofing
Resin Floors
Solvent-based water repellant
NORDRY 200 is a product based on oligomers and polymers with different functional features, capable to chemically react with inorganic mineral surfaces and make them water repellent, without affecting colour and initial transpiring properties.
The product develops a long lasting water repellent effect that will withstand UV rays and adverse weather conditions.
NORDRY 200 is used as an invisible water repellant for:
NORDRY 200, thanks to its resistance to alkaline agents, is particularly suited to protect newly laid concrete.
Available in 1, 5 and 20 litre packs.
Solvent-based water repellant
The surface to be treated must be perfectly clean and dry. If necessary, carry out a thorough cleaning with NORDECAL FORTE, followed by a generous rinsing.
Check beforehand with one or more patch tests whether there is incompatibility of materials.
When the surface is perfectly dry, apply NORDRY 200 with brush, roller or low pressure sprayer.
In case of highly absorbant surfaces, apply a second, or even a third layer, at 12 h interval.
Solvent-based water repellant
Mass per volume, UNI 8310 |
g/cm3 |
0.79 ± 0.05 |
Apparent dynamic viscosity, ISO 3219 |
mPa×s |
40 ± 15 |
Contact angle |
degrees |
> 120 |
Water repellent by immersion |
% |
> 80 |
Note: test methods refer to the regulations quoted next to them.
Solvent-based water repellant
Store in a dry place at temperatures between +4 and +30°C. Stable for at least 6 months.