NORDRY 100 ANTISALNITRO

Salt proof impregnating agent

Description

NORDRY 100 ANTISALNITRO  is a water-based polymer compound that, applied to building substrates suffering from rising damp (salt damp) phenomena, penetrates deep down to create a filter that prevents salt passage but not vapour passage.

Usage field

NORDRY 100 ANTISALNITRO can be used as a preventive and curing treatment for salt damp problems on absorbent walls.

 

Packaging

Available in packs of 1 - 5 and 25 litres.

NORDRY 100 ANTISALNITRO

Salt proof impregnating agent

Application
  • NORDRY 100 ANTISALNITRO is ready-to-use.
  • Apply a very generous product coat on the area to be treated, making sure to impregnate as thoroughly as possible: the product efficacy is proportional to the depth of penetration.
  • The most suitable method for the application of the product is rolling by carefully crossing each coat several times to allow adequate absorption.
  • The next day, apply a second coat in the same way.
  • It can be applied only on dry masonry.

NORDRY 100 ANTISALNITRO

Salt proof impregnating agent

Average Consumption

Consumption can greatly vary depending on the porosity of the surface; on average only 1 litre of product per each 2÷3 m2 of the area is needed.

NORDRY 100 ANTISALNITRO

Salt proof impregnating agent

Features

Bulk Density, UNI 8310

g/cm3

1.00 ± 0.05

Apparent dynamic viscosity, ISO 3219

mPa·s

30 ± 15

pH, UNI 8311

---

7 ± 1

Note: test methods are in accordance with the standard referred to in the table. 

NORDRY 100 ANTISALNITRO

Salt proof impregnating agent

Warning and informations
  • Avoid applying to masonry if strongly affected by rising damp and to areas where temperature can drop much below 0°C: this is to be done in order to avoid any excessive accumulation of salts phenomena under the area and consequently risking the breaking of the treated material.
  • Protect against sun's rays and high temperatures during application due to the fact that a hot area does not allow the penetration of NORDRY 100 ANTISALNITRO into the substrate.
  • The product is not dangerous, nonetheless a material safety data sheet is available.

 

 

Preservation

Store in a dry place between +4 and +30°C. Stable for at least 6 months.