EASY-LAST COAT

Elastomer finish for EASY-LAST 90

Description

EASY-LAST COAT is a solvent-based coloured non-yellowing bi-component polyurethane finish specifically designed for finishing, both aesthetically and technically, EASY-LAST 90.

EASY-LAST COAT features:

  • perfect adhesion to the coating, without any need to prepare the surface;
  • light and UV resistance (non-yellowing);
  • resistance to stagnant water;
  • resistance to mechanical stress due to loading by chairs and tables;
  • excellent vapour permeability of the EASY-LAST 90/EASY-LAST COAT system as a whole;
  • uniform colouration even when the bitumen sweats through the coating of EASY-LAST 90.

Component A is composed of a mix of pre-polymers, pigments, additives and solvents; component B consists of a mix of iso-cyanic pre-polymers.

EASY-LAST COAT is also available in the TRANSPARENT version (with a different A:B reticulation ratio from the coloured version) for use as a fixative and protective coating when using EASY-LAST 90 with a dusting of coloured FLAKES.

Usage field

EASY-LAST COAT is the ideal solution for the aesthetic and functional finishing of EASY-LAST 90.

Packaging

COLOURED version:

  • kit (A+B) 3.2 kg
  • (A+B) 10 kg

TRANSPARENT version:

  • kit (A+B) 3 kg
  • (A+B) 9 kg

EASY-LAST COAT

Elastomer finish for EASY-LAST 90

Application

The surface of the EASY-LAST 90 coating must be clean; to react chemically as required, EASY-LAST COAT must be applied to a dry surface: applying to a damp surface (due to environmental factors) may result in bubbles of vapour forming between the substrate and the coating; however this does not affect the adhesion of the finish coat.

Preparing the product:

  • open component A and make sure there are no lumps;
  • now add component B to component A and mix them together until you obtain a uniform mixture.

Application:

  • apply EASY-LAST COAT with a short pile, solvent resistant roller, making sure to distribute it evenly and working in a criss-cross pattern.
  • The COLOURED version applies in 1 or 2 coats without dilution, depending on how rough the surface is.
  • The TRANSPARENT version applies in 2 coats:
    1. the first diluted 5-10% with SOLVENTE PER NORDPUR (polyurethane solvent) as a fixative
    2. the second without dilution as a final protective coating 
Tool cleaning

Use ACETONE or a nitro solvent before the product hardens.

Hardened product must be removed mechanically.

EASY-LAST COAT

Elastomer finish for EASY-LAST 90

Average Consumption
  • COLOURED version: 0.28-0.30 kg/m2 per coat
  • TRANSPARENT version: 0.12-0.16 kg/m2 per coat

EASY-LAST COAT

Elastomer finish for EASY-LAST 90

Colors

he COLOURED version is available in 6 colours: RAL 7031, RAL 7035, RAL 7040, RAL 1001, RAL 6002 and RAL 8004.

 

Features

 

 

EASY-LAST COAT

COLOURED

EASY-LAST COAT

TRANSPARENT

specific gravity (A+B), UNI 8310

g/cm³

1.23 ± 0.03

1.04 ± 0.03

pot-life (+20°C)

minutes

25

35

application temperature

°C

from +5 to +35

maximum application humidity

%RH

85

surface drying time (resistance to water)

hours

2

2-3

walkover time (at +20°C)

hours

6-7

12-18

final curing time

days

7

7

mix ratio (by weight)

A: B

3 : 1

2 : 1

EASY-LAST COAT

Elastomer finish for EASY-LAST 90

Warning and informations
  • Do not try to extend the product's life by diluting it.
  • Do not apply if you are expecting it to rain.
  • Do not apply if the relative humidity is greater than 85%.
  • The temperature must be at least 3°C higher than the dew point, and never less than +5°C.
    • Read the safety sheet carefully before using the product.