FIBRE IN ACCIAIO

Structural Reinforcing Fibres for Concrete

Description

Steel fibres L30-L/D48-CL45 are hooked end fibres produced from cold drawn low carbon steel wire and meet EN 10016-2 C9D standards. These fibres are to be added during mixing and allow the elimination of the can replace the stainless steel wire mesh. The fibres shape, and specially their hooked ends, give them a considerable pull-out force.

Steel fibres L30-L/D48-CL45 are collated into small bundles to facilitate both the dosing and their introduction into the cement mixture.

 

Usage field

Steel fibres L30-L/D48-CL45 are used as the main reinforcing for:

  • industrial floors (with spaced joints);
  • roads;
  • parking areas.
Packaging

20 kg water-soluble paper bags in 1200 kg pallets

FIBRE IN ACCIAIO (STEEL FIBRES) L30 – L/D48 –CL45

Structural Reinforcing Fibres for Concrete

Average Consumption
  • Minimum steel fibres dose = 30 kg/m3 (of concrete)
  • MAXIMUM recommended dose:

concrete particle grain-size distribution [mm]

dose [kg/m3]

cast

pumped

2¸8

160

120

4¸16

100

75

4¸32

80

60

FIBRE IN ACCIAIO (STEEL FIBRES) L30 – L/D48 –CL45

Structural Reinforcing Fibres for Concrete

Features

length of the fibre, L

mm

30.0 ± 0.2

wire diameter, D

mm

0.62 ± 0.01

L/D ratio

-

48

number of fibers/kg

fibre/kg

13000

wire tensile strength

N/mm2

> 1100

coating

-

none

FIBRE IN ACCIAIO (STEEL FIBRES) L30 – L/D48 –CL45

Structural Reinforcing Fibres for Concrete

Warning and informations
  • We recommend to keep the particle size curve constant;
  • mix the mixture until full disintegration of the  bundles and the release of fibres;
  • the use of L30-L/D48-CL45 STEEL FIBRES does not require extra mixing time;
  • a trial batch test must always be performed if using special cements or additives.
Preservation

Protect the pallets from rain.

Do not load a pallet on the other.