W3 COLORATO / COLORABILE

Three component, coloured skim coating for “Venetian Plaster Effect” floors

Description

W3 COLORATO is a three component product made up of:

  • component A: aqueous dispersion of liquid epoxy pre-polymers, additives and special fillers;
  • component B: aqueous dispersion of co-polymerisation polyamines and additives;
  • component C: cementitious powder.

 

W3 COLORATO is specifically designed to realize a Venetian Plaster Effect in the resin.

W3 is available in two versions:

COLORATO with pre-pigmented component A;

COLORABILE with pigment-free component A, that must be coloured with the mixtures belonging to the NORDRESINE “SISTEMA TINTOMETRICO” water based range.

Usage field

W3 COLORATO is used to realize floors for the private and commercial building sector.

Packaging

W3 COLORATO

  • 10 kg Kit composed of
  • A : B : C = 2.5 : 2.5 : 5.0
  • 20 kg Kit  composed of
  • A : B : C = 5.0 : 5.0 : 10.0

W3 COLORABILE

  • 9.75 kg Kit  composed of
  • A : B : C = 2.25 : 2.50 : 5.00
  • 19.5 kg Kit composed of
  • A : B : C = 4.5 : 5.0 : 10.0

W3 COLORATO / COLORABILE

Three component, coloured skim coating for “Venetian Plaster Effect” floors

Application
  • Care must be taken to ensure that the substrate is a structurally sound and suitable base. This is particularly important when work is to be carried out on areas which, when put into use, can be negatively affected by episodes of negative pressure caused by humidity.
  • Depending on the area existing condition, the kind of treatment to be performed shall be chosen between the following:

- Pressure hot water washing;
- acid washing;
- sanding;
- diamond-grinding;
- scarifying
- sand-blasting.

In this way dust, dirt, grease, oil, old glue or varnish,, efflorescence, rust, mould and other foreign material will be removed.

Any area’s dips or humps having a depth higher than 5 - 10 mm must be filled with GROVE RAPIDO

W3 COLORATO / COLORABILE

Three component, coloured skim coating for “Venetian Plaster Effect” floors

Features

Bulk Density (A+B+C)

g/cm³

1.5 ± 0.1

Pot-life, UNI EN ISO  9514

min

90 ± 10

Superficial Drying Time UNI 8904

hours

6 ± 1

Minimum Curing Time

days

> 7

Application Temperature

°C

+10 ¸ +35

Bending Strength, ISO 178

MPa

45 ± 15

Compressive Strength, UNI 4279

MPa

98 ± 10

permeability to water vapour DIN 52615

m

6000 ± 500

Resistance to  Abrasion, UNI 8298 (wheels CS-10, revs 1000, masses:1000g

mg

<95

Adhesion to concrete (pull-off test), ASTM D 4541

MPa

> 3.5

Class of Reaction to Fire DM 06/26/1984 - updated DM 09/03/2001

----

1

Ratio A : B : C

1.0 : 1.0 : 2.0

N.B. test methods are in accordance with the standard referred to in the table.  

W3 COLORATO / COLORABILE

Three component, coloured skim coating for “Venetian Plaster Effect” floors

Warning and informations
  • Do not use at temperatures less than +8°C.
  • Suspend application 90 minutes after the mixing of the components of the product. Adding water does not allow the return of the correct viscosity.
  • Read the Material Safety Data Sheet.
Preservation
  • comp. A and B: 24 months in the original packaging, in a covered and dry place at temperatures between +5°C and +30°C. Cold sensitive.
  • comp. C: 12 months in the original packaging, in a covered and dry place at temperatures between +5°C and +30°C. Humidity sensitive.

W3 COLORATO / COLORABILE

Three component, coloured skim coating for “Venetian Plaster Effect” floors