X-POWDER

Polyurethane Anti-Dust Agent for Floors

Description

X-POWDER is a solution of polyurethane resins that harden due to moisture.

X-POWDER is an ideal protective and anti-dust impregnation and consolidation agent for concrete floors.

Given its high fluidity and penetrating features, the product is also suited for application on low porosity substrates.

Usage field

X-POWDER is ideally suited for the protection of industrial concrete floors subjected to heavy loads.

 

The main features of X-POWDER are:

  • excellent penetration into the substrate;
  • Rapid superficial and deep hardening, even at low temperatures (down to 0 ° C);
  • grants high hardness and abrasion resistance to the manufactured product;
  • high chemical resistance to water, solvents, alkalis and chemicals in general.

 

X-POWDER is ideally suited for the protection of industrial concrete floors subjected to heavy loads.

Packaging

20 liter metal bucket.

X-POWDER

Polyurethane Anti-Dust Agent for Floors

Application

On new floors:

  • dust and any scales resulting from cutting joints shall be removed by washing thoroughly with water;
  • excess water shall be completely removed, taking care that no standing water is left behind on the area to be treated;
  • 1-2 days after drying, X-POWDER shall be evenly applied with a roller, preventing accumulation of the product that may alter the appearance of the surface.

The product can be applied wet on wet in two (or more) coats, at a maximum interval of one hour between each coat.

 

On old floors:

  • degrease with Stripper (by insisting over previously existing wax based treatments), rinse and remove all excess water, taking care no standing water is left behind in the area to be treated;
  • after 3-4 days of drying, apply X-POWDER as previously described.

X-POWDER

Polyurethane Anti-Dust Agent for Floors

Average Consumption

Average consumption/dosage: 150-200 g / m2, depending on the porosity of the substrate.

X-POWDER

Polyurethane Anti-Dust Agent for Floors

Features

Bulk Density, UNI 8310

g / cm³

0.95 ± 0.03

Appearance

-

intense yellow transparent liquid

Dry residue at 110 ° C, UNI 8309

%

22.0 ± 0.5

Curing minimum time of aging at +4 ° C and 70% RH

Hours

24-36

Cross-linking minimum temperature of curing

°C

0

Note: The test method is based on the related standards shown on the right side of the table.

 

Chemical Resistance

Distilled water

na

Sea Water

na

Sulphuric acid 10%

na

Hydrochloric acid 10%

na

Nitric acid 10%

na

Acetic acid 10%

10 days (bubbles)

Formic acid 10%

8 days (bubbles)

Lactic acid 25%

na

Citric acid 10%

na

Linseed oil

na

Caustic Soda 20%

na

Sea salt only. 10.

na

Ammonia 10%

20 days (bubbles)

Chlorinated water 3% Cl 2

na

Hydrogen peroxide 10%

na

Petrol

na

Xylene

na

Methylene Chloride

1 day (break)

Acetone

10 days (softening)

Ethyl Alcohol 10%

na

na = no alteration

X-POWDER

Polyurethane Anti-Dust Agent for Floors

Warning and informations
  • The product is prone to yellowing and for this reason it is advisable to use it only for indoor treatment.
  • Tools used to apply the product can be washed with a solvent (ACETONE, ALCOHOL, NITRO DILUENT) before product has hardened.
  • refer to the Material Safety Data Sheet (MSDS) before use.
Preservation

6 months in its original packaging, in a covered and dry place. At temperatures between +5 ° C and +35 ° C.

X-POWDER

Polyurethane Anti-Dust Agent for Floors

Solutions number