RASANTE 1200

Coarse texture Skim Coating for
Outdoor and Indoor Exterior Rendering

Description

RASANTE 1200 is a monocomponent, pre-mixed powder formulated with hydraulic binders, selected aggregates and resins, which, after mixing with water, produces a mixture ideally suited for both indoor and outdoor finish coats.

Usage field

RASANTE 1200 can be applied to any type of either new or old building substrate (cement, gypsum, plastic, etc..) as well as to both interior and exterior surfaces.

RASANTE 1200 is a product ideally suited for the rehabilitation of vertical surfaces made of either concrete or with plastic render as well as for tiled vertical surfaces and can be easily applied to any surface requiring excellent substrate adhesion, workability and a uniform coating layer.

Packaging

25 kg bag in 48 bags pallets

RASANTE 1200

Coarse texture Skim Coating for
Outdoor and Indoor Exterior Rendering

Application

Preparing the Substrate

-  carefully clean and moisten the substrate if absorbent;

- cured surfaces with existing chalking should be pretreated with NORDLATEX VA.

Preparing the Product

Mix one bag of RASANTE 1200 with 5.5÷6.0 liters of clean water (22-24%) with a low speed professional mixer and impeller or in a concrete mixer or in a in a continuous plaster sprayer.

Applying the Product

-  Leave to rest for about ten minutes, stir briefly the product again and then proceed with the application.

- Apply with either a steel or plastic plastering trowel in two coats, approx. one hour apart from each other

- As soon as the product starts to set, finish with a sponge float, wetting as much as it is needed to achieve optimal results.

-  Whenever a very smooth finish is required, proceed with finishing using a steel plastering trowel that must be wetted as soon as the product start to harden.

Tool cleaning

Tools with fresh product shall be cleaned with water; if the product has hardened, it must be mechanically removed.

RASANTE 1200

Coarse texture Skim Coating for
Outdoor and Indoor Exterior Rendering

Average Consumption

To obtain 1 mm thick hardened product, approx. 1.5 kg of product per 1 square meter shall be used.

RASANTE 1200

Coarse texture Skim Coating for
Outdoor and Indoor Exterior Rendering

Colors

The product is available in white and gray.

Features

PRODUCT IDENTITY DATA

consistency

 

---

dust

colour

 

----

white, gray

solid residue

 

%

100

granulometry, EN 933-1

 

mm

< 0.6

APPLICATION DATA (at +20 ° C and 50% RH)

hardened bulk mass

 

kg/m3

1,450

mixing Water

 

%

22 ÷ 24

pot life

 

min

90

workability

 

min

20

application temperature

 

°C

from +5 to +35

waiting time before trowelling

 

min

20

overcoating

 

min

60

curing time before painting

 

days

15 ÷ 20

FINAL PERFORMANCE

compressive strength, EN 1015-11

at 28 days

N/mm2

12

flexural strength, EN 1015-11

at 28 days

N/mm2

4

adhesion on concrete, EN 1542

at 28 days

N/mm2

1.2

reaction to fire

 

euroclass

A1

Note: testing methods are in accordance with the standards referred to on the table. 

RASANTE 1200

Coarse texture Skim Coating for
Outdoor and Indoor Exterior Rendering

Warning and informations

-         Apply at temperatures between +5°C and +35°C.

-         Avoid application in full sun or wind.

-         Do not add cement or sand to the product.

Preservation

2 months in its original packaging, in a covered and dry place, at temperatures between +5°C and +35°C.

This product is moisture sensitive.

RASANTE 1200

Coarse texture Skim Coating for
Outdoor and Indoor Exterior Rendering