RASOMIX®
Non-Shrinking,
Grey and White Skim Coating- Plaster
for Indoors and Outdoors
Description
RASOMIX is a fibre reinforced, no-shrinking skim coating-plaster offering high plasticity properties even while setting, designed for any type of skim coating, repair and filling, plus re-forming of missing parts, including the creation of raised features, by hand or with the use of moulds.
Usage field
RASOMIX is used:
- to fill cracks and re-form missing parts on concrete surfaces;
- to restore old plasters, even partially;
- to reconstruct and remould missing parts on balconies, stairs and other architectural features;
- to provide low, medium or high thickness finishing (up to 30 mm) in one layer.
Available in WHITE and GREY - 25 kg bags on 56 bag pallets.
RASOMIX®
Non-Shrinking,
Grey and White Skim Coating- Plaster
for Indoors and Outdoors
Application
Preparing the Substrate:
- carry out a thorough cleaning and eliminate all loose material;
- substrates with existing high chalking rate must be pre-treated with NORDLATEX VA.
Preparing the product
Add one RASOMIX bag to 6.0÷6.5 litres clean water and mix slowly with a whisk mixer to obtain a lump free mixture, using as much water as required by the job.
Applying the product
Apply one layer with trowel, steel float or plaster trowel and finish with sponge float or steel float, wet.
On large surface areas, if you want to make layers thicker than 15 mm in one go, add some washed gravel (5 to 10 mm particle size), not exceeding however 1/3 of the total mix volume.
RASOMIX®
Non-Shrinking,
Grey and White Skim Coating- Plaster
for Indoors and Outdoors
Average Consumption
To obtain a 1 mm thick layer (hardened) you need c. 1.2 kg product per m².
RASOMIX®
Non-Shrinking,
Grey and White Skim Coating- Plaster
for Indoors and Outdoors
Features
|
|
|
white |
grey |
|
Mass per volume (hardened) |
g/cm3 |
1.5 |
|
|
Mix life |
min |
60 |
|
|
Board life |
min |
45 |
|
|
Wait time before painting |
days |
15 |
|
|
Compression resistance at 28 days, UNI EN 196-1 |
MPa |
7.5 |
6.5 |
|
Flexural resistance at 28 days, UNI EN 196-2 |
MPa |
4.4 |
3.3 |
|
Adhesion |
MPa |
1.1 |
|
|
Particle size, UNI EN 933-1 |
mm |
< 0.63 |
|
|
Setting time START-END, UNI EN 196-3 |
min |
30 - 60 |
|
|
Mix water content |
% |
24 ÷ 26 |
|
|
Fire reaction class |
--- |
0 |
|
Note: test methods refer to the regulations quoted next to them.
RASOMIX®
Non-Shrinking,
Grey and White Skim Coating- Plaster
for Indoors and Outdoors
Warning and informations
Apply at temperatures between +5°C and +35°C.
Preservation
12 months in the original packs, in a sheltered dry place, at a temperature between +5°C and +35°C.
Protect from dampness.
Download