Tile adhesives

Tiles adhesives, the technologically advanced solutions and next-generation for your needs gluing the tiles. Convenience and efficiency along the length are the strengths of adhesives for tiles by Nordresine.

CLASSIFICATION
COMPOSITION
PRODUCT TYPE
BETON CR » 
Two-Component Epoxy Tile Adhesive

BETON CR is a tile adhesive formulated into two separate components to be mixed immediately before use to obtain an adhesive suitable for bonding tiles of all kinds on every type of surface. BETON CR …

BETON-H 1 » 
Tile Adhesive
C2TE-S2 (Highly Deformable)

BETON H-1 is a mono-component tile adhesive classified as C2TE-S2 according to EN 12004, composed of cement, sand of selected granulometry, resins and special additives. It shall be prepared with the only …

BETONLATEX » 
Waterproofing Flexibilizing Additive for Adhesives and Mortars

BETONLATEX is a product made from an aqueous dispersion of elastomeric polymers, emulsifiers, stabilizers and additives. BETONLATEX is an additive for adhesives and cementitious mortars that is specifically …

 
EPOSEAL W » 
High Chemical Resistance anti-Mould Colored Epoxy Grout for Tiles and Mosaics Joints from 2 mm to 15 mm - also Useable as an Adhesive

EPOSEAL W is a colored two-component grout, characterized by high chemical and mechanical resistance and based on epoxy resin, siliceous aggregates and special fillers, specifically designed for grouting and …

MONOTACK® FLEX » 
Mono-Component Tile Adhesive

CE MARK EN 12004 - C2 TE S1

MONOTACK FLEX is a single-component tile adhesive made of cement, quartz sands of selected granulometry, resins and special additives. This product is easily workable, it has high adhesivity and thixotropy …

MONOTACK® FLEXORAPID » 
Mono component gray adhesive for Tile and Natural Stone EN 12004 - C2 F TE S2

MONOTACK®FLEXORAPID  is a highly deformable, fast setting, gray, single-component adhesive for ceramic tiles and natural stone with extended open time and limited slip, consisting of cement and silica sand …

 
MONOTACK® H BOND » 
Mono-Component Tile Adhesive

MONOTACK H BOND is a mono-component adhesive for tiles, composed of cement, sand of selected granulometry, resins and special additives. It shall be prepared by mixing with the only addition of water at the …

MONOTACK® MARMORAPID » 
White Mono-Component
Tile and Natural Stone Adhesive
EN 12004 - F TE C2

MONOTACK® MARMORAPID is a single-component adhesive for marble consisting of cement, white sand of selected granulometry, resins and special additives. MONOTACK® MARMORAPID shall be prepared by mixing with the …

MONOTACK® SR » 
Tile Adhesive

MONOTACK SR is a single-component tile adhesive made up of cement, sand of selected granulometry and special additives. It shall be prepared by mixing with the only addition of water at the time of …

 
MONOTACK® SUPER » 
Tile Adhesive

MONOTACK SUPER is a single-component adhesive for tiles made up of cement, sand of selected granulometry and special additives. It shall be prepared by mixing with the only addition of water at the time of …

PK 170 » 
High Performance Ready to Use
Adhesive Dough for Tile Installation
CE marked according to EN 12004, class D2TE

PK 170 is a mono-component adhesive dough consisting of an aqueous dispersion of acrylic resins, sand of selected granulometry and special additives. PK 170 is ready to use. It comes in the form of an easily …

RICRETE 1C » 
One Component Primer
for substrates

RICRETE-1C is a ready to use mono component primer based on hybrid resins in water dispersion. RICRETE 1C ​​forms by rapidly curing a water resistant, rugged, compact film highly adhesive on shiny and …

 
RIVLATEX SU » 
One Component Primer
for Absorbent Substrates

RIVLATEX SU is a ready to use mono component primer based on hybrid resins in water dispersion. Once applied, in a very short time this product gives rise to a waterproof, very compact, glossy and elastic film, …