Certifications

Resistance to Growth of Mold

Determination of resistance against fungal growth according standard UNI EN 15457:2008:

EPOSEAL W
FARMACRETE
NORPHEN 200 HCR
Click on the product to see the certificate.

CE Marking - Construction Products

With the introduction of Regulation (EU) No. 305/2011 of the European Parliament and of the Council of 9 March 2011, the EC Declaration of Conformity (prerequisite for the affixing of the CE marking in accordance with the EEC Directive 89/106 on construction products, transposed into Italian law by Decree n. 246 of the President of the Republic of April 21, 1993) is replaced by the Declaration of Performance (Article 4 of Regulation 305/2011).

Declarations of Performance available for download are here below:

BETON COLOR MALTAFIX NORPHEN RICRETE
(NORPHEN) FONDO SL (NORPHEN) MALTA BASE NORPHEN SW FONDO
BETON CR MAT 20 (NORPHEN) SW SOLID
BETON TACK MONOTACK FLEX BIANCO e GRIGIO NORTIG
BETONGUAINA MONOTACK FLEXORAPID NORTIG 15
BETONGUAINA®.S MONOTACK H BOND BIANCO e GRIGIO NORTIG 15 FIBRATO
BETONGUIANA BASEMENT MONOTACK MARMORAPID PRO TILER
BETON-H1 MONOTACK SR BIANCO e GRIGIO PU BASE
BETONSEAL MS 2.0 MONOTACK SUPER BIANCO e GRIGIO Q-PRIMER
CARBO STUCCO 70 NATURAL BASE Q-RASANTE
CARBO GEL NATURAL BASE QUARTZ Q-SMALTO
CEM OX NORDBLACK RASANTE 1200
CEM-O-LUX NORDCEM RASANTE 1200 S
DEKOR-SEAL S 500 NORDCOLOR RASANTE 2000 2K
DEKOR-SEAL S 500 OPACO NORDGROUTH TIXO RASOMIX
DRY BETON SUPER NORDPUR ESTERNI RICRETE 1 C
EASY LAST 90 NORDPUR ESTERNI ADS RIVENORD LAST
EP LASTIK NORDPUR ESTERNI EXTRAGRIP SC 1 MASSETTO PRONTO
EPOSEAL W NORDPUR SW SC 1-F
FARMACRETE NORDRY 200P SOLID
FLOOR L TRA NORDSIL AC STRATOFLEX
FONDO SL GEL NORPHEN 200 SW SMALTO
GROVE 30 NORPHEN 200 FONDO SW SMALTO LC
GROVE MASSETTO NORPHEN 200 FUEL TRAFFIDECK FLEX 3000 HA
GROVE RAPIDO NORPHEN 200 HCR W3 IMPERMEABILIZZANTE
GROVE RASANTE NORPHEN 200 HCR AUTOESTINGUENTE X-CEM BASE
GROVE RIPRISTINO NORPHEN FONDO IGRO X POWDER
LEVEL CRETE NORPHEN INJECTION
LITOSCREED BASE NORPHEN LEVEL
MALTA RAPIDA

Conformity of Factory Production Control (FPC)

Nord Resine has obtained the certification of conformity of Factory Production Control of products and systems for the protection and repair of concrete structures:

  • Surface protection systems for concrete (EN 1504-2:2004)
  • Structural and non-Structural Repair (EN 1504-3:2005)
  • Structural bonding (EN 1504-4:2004)
  • Concrete injection (EN 1504-5:2004)
  • Reinforcement Corrosion Protection (EN 1504-7:2006)
  • Additivi per malte per cavi di precompressione (EN 934-4:2009)

Reaction to Fire

The REACTION TO FIRE CLASSIFICATION (UNI EN 13501-1:2007) is available and certifies that the products listed below fall under this class:

Food Contact

NORPHEN FOOD is used is used to produce waterproof coatings on concrete and metal food storage tanks and reservoirs. For all foods which must undergo the migration tests using the following simulants:

  • aqueous solution of acetic acid 3% (weight/volume);
  • 10% aqueous solution of ethanol (volume/volume);
  • water;
  • rectified olive oil;

NORPHEN FOOD is compliant with and certified according to the MD 21/03/73 and subsequent updates. In addition to the overmentioned simulants, NORPHEN FOOD is also suitable for contact with hydroalcoholic solutions at 45% and 90% by volume of ethanol

Click here to download the test report

Clean room

NORPUR SW has been awarded the Fraunhofer IPA CSM Certificate of Qualification with the report number NO 1405-708:

Download the certificate

Download the statement of qualification

Asbestos-Cement Encapsulation

The test report for the product AMIANTOPLAST certifying its suitability for use as an encapsulant for asbestos-cement sheets according to class “Type A” is available. Click here to view the certificate.

The table below summarizes the tests which must be carried out according to the type of encapsulants products:

Type Intended Use Laboratory tests
Encapsulants TYPE A For the encapsulation of exterior exposed asbestos-cement artifacts .Also the encapsulating coating to be applied on the intrados of slabs whose extrados is directly in contact with the environment is listed in this section.
  • adherence: 11 of the UNI 10686
  • impermeability to water: 12 of standard UNI 10686
  • resistance to freeze-thaw: § 13 of standard UNI 10686
  • evidence of sun-rain: 14 of standard UNI 10686
  • resistance to accelerated aging: 15 of standard UNI 10686
  • reaction to fire: 16 of standard UNI 10686
Encapsulants TYPE B For the encapsulation of interior exposed asbestos-cement artifacts.
  • adherence: 11 of standard UNI 10686
  • reaction to fire: 16 of standard UNI 10686
  • washing resistance: according to standard UNI 10560
Encapsulants Not exposed: When used to encapsulate asbestos-cement products, to support encroachment and over-coverage interventions
  • adherence: 11 of standard UNI 10686
  • impermeability to water: 12 of standard UNI 10686
  • resistance to freeze-thaw: 13 of standard UNI 10686
  • reaction to fire: 16 of standard UNI 10686
Encapsulants TYPE D Auxiliary: if applied to prevent the release of asbestos fibers into the environment to support removal interventions during the operations for the disposal of asbestos-containing materials. There is no test. The supplier shall indicate:

  • the thickness of the dry film;
  • the amount to be applied per square meter;
  • drying time.

Slip Resistance

For NORPHEN LEVEL floorings the test report showing the coating compliance with CLASS A (footwear slip resistance) of standard prEN 13845-2000 is available

To view the test reports, simply click on the product name.

Road sector - Protective Coating for Road Tunnels

For (NORPHEN) SW SMALTO water-based epoxy coating a test report, issued by the Swiss laboratory EMPA (Swiss Federal Laboratories for Materials Testing and Research), confirming its suitability for use as a protective coating for road tunnels, is available (in English and German).
The material underwent the following tests:

  • behavior under steam;
  • impact test with 1 kg metal ball;
  • resistance to alkaline solutions;
  • evaluation of resistance to washing;
  • permeability to water vapor;
  • test on chloride diffusion;
  • gloss determination;
  • adhesion test.

Click here to view the certificate.

HACCP - SUITABILITY FOR ENVIRONMENTS WITH THE PRESENCE OF FOOD (UNI 11021: 2002)

Here available the test reports that certify the suitability of the products listed for coating surfaces in environments with food :

Here available the test reports are available that attest to the suitability for contact with water intended for human consumption according to the requirements established by Italian Ministerial Decree No. 174 dated 6/04/2004

Click to view the certificate

SRI - SOLAR REFLEXION INDEX

Here available, for the elastomeric finish of the EASY LAST 90 waterproofing system EASY LAST COAT WHITE, the test report for the determination of the “SRI”, solar reflection index, according to ASTM E1980 – 11

Click to view the certificate