Liquid-applied waterproofing products

Liquid waterproofing products for the construction industry created to provide maximum efficiency. The result of the most recent studies and laboratory tests of Nordresine, you provide a real alternative all'impermeabilizzare without demolishing.

COMPOSITION
FUNCTION
BETON COLOR » 
Coloured Coating for BETONGUAINA and BETONGUAINA.S

BETON COLOR is a two component polyurethane non- yellowing coloured and weather-resistant coating specifically designed for the aesthetic protection of two components water-based membranes like BETONGUAINA and …

BETON-H 1 » 
Tile Adhesive
C2TE-S2 (Highly Deformable)

BETON H-1 is a mono-component tile adhesive classified as C2TE-S2 according to EN 12004, composed of cement, sand of selected granulometry, resins and special additives. It shall be prepared with the only …

BETON-ISO » 
Thermally Insulating
Three-component Mortar

BETON-ISO is a lightened three-component mortar with a significant thermal insulation capacity. These characteristics result from using in the formula high resistance foam glass fillers.  

 
BETONGUAINA BASEMENT » 
Bi-component cement waterproofing coating
for underground structure
CE MARKING:
EN 1504-2 (C)-PRINCIPLES PI-MC-IR; EN 14891 (CMO2P)
 

BETONGUAINA BASEMENT is a bi-component cement waterproofing coating for underground structures, composed of: component A: water-dispersed polymers and special additives; component B: hydraulic binders, selected …

BETONGUAINA® » 
Two-component liquid membrane

BETONGUAINA is an integrated water-based waterproofing system composed of: component A: aqueous dispersion of polymers and additives; component B: reactive fillers; After film formation, BETONGUAINA forms a …

BETONGUAINA®.S » 
Highly elastic two-component liquid membrane European Technical Approval - ETA No. 006/0109

BETONGUAINA.S is an integrated water-based waterproofing system composed of: component A: aqueous dispersion of polymers and additives; component B: reactive fillers; After film formation, BETONGUAINA.S forms a …

 
BETONSEAL MS 2.0 » 
Monocomponent Sealant
for Waterproofing Systems
based on BETONGUAINA and BETONGUAINA.S

BETONSEAL MS 2.0 is a solventless and isocyanate-free, one component and neutral sealant based on MS PolymerTM, with low elastic modulus, fast cross-linking, high elasticity and excellent adhesion properties to …

BLACK PLAST W » 
Waterproofing membrane
fibre-reinforced paste

BLACK PLAST W is a very dense waterproofing paste based on polymers, bitumens, admixtures and special fibres in aqueous emulsion. After curing the product forms a very thick layer, which is extraordinarily …

EASY-LAST 90 » 
One component elastomeric waterproofing liquid membrane with high transpiration rate

EASY-LAST 90 is a gray, thick liquid product made up of one-component polyurethane polymers that by reacting with moisture, forms (even at low temperature) a UV resistant and weatherproof elastomeric membrane. …

 
EASY-LAST COAT » 
Elastomer finish for EASY-LAST 90

EASY-LAST COAT is a solvent-based coloured non-yellowing bi-component polyurethane finish specifically designed for finishing, both aesthetically and technically, EASY-LAST 90. EASY-LAST COAT features: perfect …

EP LASTIK » 
Two component waterproofing flexible mortar

EP LASTIK is a two-components water-based flexible mortar consisting of: component A: concrete ready mix; component B: aqueous dispersion of polymers and additives.   EP LASTIK may be applied on both …

FONDO C60 » 
Adhesion Primer for Liquid Membranes

FONDO C60 is a fluid liquid made of polymers dissolved in a solvent which, when applied to a surface treated with various types of liquid membranes, creates the perfect conditions for the subsequent bonding of …

 
HELASTON COLOR » 
Two-component elastomeric membrane

HELASTON COLOR is a two component product consisting of: Component A: a mixture of emulsified functionalized prepolymers, additives and fillers; Component B: prepolyisocyanates and solvent.   The two …

HELASTON SOL » 
Liquid waterproofing membrane

HELASTON SOL is a monocomponent solvent-based system made up of elastomeric polymers, bitumen and additives. Once fully cured, the film exhibits excellent impermeability, cold flexibility and elastic elongation …

NORDBLACK » 
Liquid Waterproofing Membrane

NORDBLACK is a water based waterproofing system made up of a dispersion of elastomeric polymers, bitumen, modifiers, fillers and additives. Once fully cured, the product gives rise to a film that exhibits good …

 
NORDPUR ROOF SG » 
Senza solventi poliuretanica membranewith due impermeabilizzazione componente istantanea cross-linking  per applicazioni a spruzzo

NORDPUR ROOF SG è un bicomponente, prodotto in poliuretano altamente reattivo esente da solventi, con reticolazione istantanea. Una volta miscelato, i due componenti danno origine ad una membrana impermeabile …

NORDSIL AC » 
Acetic-reticulation silicone sealant EN 1561-1/2/3: F-EXT-INT/G/S ISO 11600: F-20LM/G-20LM

NORDSIL AC is a pure silicone single-component acetic-reticulation sealant, solvent-free, with low modulus of elasticity and high resistance to mould, yellowing, ageing and high and low temperatures (-60°C to …

NORTIG » 
Liquid waterproofing membrane

NORTIG is a water-based system made up of an aqueous dispersion of polymers, modifiers, additives and fillers. After curing, the product offers good waterproofing and weatherproofing properties. NORTIG is …

 
NORTIG 15 FIBRATO » 
Fibre-loaded water-based single-component fluid waterproofing coating
CE MARKING EN 1504-2 (C) - PRINCIPLES PI-MC-IR

NORTIG 15 FIBRATO is a fibre-reinforced fluid paste for use on balconies and terraces without the need for reinforcement. When applied to the surface, it forms a coloured film which is resistant to sunlight (IR …

NORTIG FIBER-LAST » 
Fiber-elastic waterproofing liquid membrane

NORTIG FIBER-LAST is a ready to use mono-component membrane consisting of aqueous dispersion polymers, additives, fillers and special polymer fibres. NORTIG FIBER-LAST creates an elastic fibre-reinforced film, …

PRO-TILER » 
Tile-Saver Protection for terraces

PRO-TILER FONDO is a solvent-based compound based on oligomers and polymers capable of chemically reacting with mineral surfaces to make them water-repellent while leaving the colour and initial breathability …

 
TIPEWALL » 
Polyurethane Finish

TIPEWALL is a two component product made up of: component A: a mixture of functionalized prepolymers, pigments, additives and solvents; component B: prepolysocyanate.   The two mixed components give rise …

TIPEWALL TRASPARENTE (AGR ADS) » 
Two-Component Protective Gloss Finish

TIPEWALL TRASPARENTE is a two component product comprising: component A: a mixture of functionalized prepolymers, pigments, additives and solvents; component B: prepolysocyanate.   Once mixed, the two …

TRAFFIDECK FLEX 2000 SG » 
Instantaneously cross-linking solvent-free two-component polyurethane waterproofing membrane for spraying application

Instantaneously cross-linking spray applied waterproofing membrane

 
TRAFFIDECK FLEX 3000 HA » 
Solvent free, 2 component hand applied polyurethane waterproof membrane

FLEX 3000 HA is a two-component membrane based on highly reactive polyurethane resins that are solvent-free and have high mechanical properties. This system allows to obtain both an excellent tensile strength …

TRAFFIDECK GRIP 1000 » 
Solvent free, fast-cross-linking flexible
two-component polyurethane armoured coating

Rapid curing coating for finishing floors